react-native 使用leanclound消息推送

iOS消息推送的基本流程

1.注册:为应用程序申请消息推送服务。此时你的设备会向APNs服务器发送注册请求。2. APNs服务器接受请求,并将deviceToken返给你设备上的应用程序3.客户端应用程序将deviceToken发送给后台服务器程序,后台接收并储存。4.后台服务器向APNs服务器发送推送消息5.APNs服务器将消息发给deviceToken对应设备上的应用程序

使用leanclound进行消息推送

优势:文档清晰,价格便宜

接入Leanclound

1.首先需要创建一个react-native项目

react-native init projectName

2.在leancloud创建一个同名项目,并记录好appid和appkey

react-native 使用leanclound消息推送react-native 使用leanclound消息推送

3.项目创建成功后,安装推送所需的模块(需要cd到工程目录)

1.使用yarn安装

yarn add leancloud-storage
yarn add leancloud-installation

2.使用npm安装

npm install leancloud-storage --save
npm install leancloud-installation --save

4.在项目目录下新建一个文件夹,名字为pushservice,在里面添加一个js文件PushService.js,处理消息推送的逻辑,

1.在index.js初始化leanclound

import AV from ‘leancloud-storage‘
...
/*
*添加注册的appid和appkey
*/
const appId = ‘HT23EhDdzAfFlK9iMTDl10tE-gzGzoHsz‘
const appKey = ‘TyiCPb5KkEmj7XDYzwpGIFtA‘
/*
*初始化
*/
AV.initialize(appId,appKey);
/*
*把Installation设为全局变量,在其他文件方便使用
*/
global.Installation = require(‘leancloud-installation‘)(AV);

...

2.iOS端配置

首先,在项目中引入RCTPushNotification,详情请参考:Linking Libraries - React Native docs

步骤一:将PushNotification项目拖到iOS主目录,PushNotification路径:当前项目/node_modules/react-native/Libraries/PushNotificationIOS目录下
步骤二:添加libRCTPushNotification静态库,添加方法:工程Targets-Build Phases-link binary with Libraries 点击添加,搜索libRCTPushNotification.a并添加
步骤三:开启推送功能,方法:工程Targets-Capabilities 找到Push Notification并打开
步骤四:在Appdelegate.m文件添加代码
#import <React/RCTPushNotificationManager.h>
...

//注册推送通知
-(void)application:(UIApplication *)application didRegisterUserNotificationSettings:(UIUserNotificationSettings *)notificationSettings{
  [RCTPushNotificationManager didRegisterUserNotificationSettings:notificationSettings];
}
// Required for the register event.
- (void)application:(UIApplication *)application didRegisterForRemoteNotificationsWithDeviceToken:(NSData *)deviceToken
{
  
  [RCTPushNotificationManager didRegisterForRemoteNotificationsWithDeviceToken:deviceToken];
}
// Required for the notification event. You must call the completion handler after handling the remote notification.
- (void)application:(UIApplication *)application didReceiveRemoteNotification:(NSDictionary *)userInfo
fetchCompletionHandler:(void (^)(UIBackgroundFetchResult))completionHandler
{
  NSLog(@"收到通知:%@",userInfo);
  [RCTPushNotificationManager didReceiveRemoteNotification:userInfo fetchCompletionHandler:completionHandler];
}
// Required for the registrationError event.
- (void)application:(UIApplication *)application didFailToRegisterForRemoteNotificationsWithError:(NSError *)error
{
  NSLog(@"error == %@" , error);
  [RCTPushNotificationManager didFailToRegisterForRemoteNotificationsWithError:error];
}
// Required for the localNotification event.
- (void)application:(UIApplication *)application didReceiveLocalNotification:(UILocalNotification *)notification
{
  NSLog(@"接受通知:%@",notification);
  [RCTPushNotificationManager didReceiveLocalNotification:notification];
}

5. 获取deviceToken,并将deviceToken插入到_Installation

找到PushService文件,编写代码

//引用自带PushNotificationIOS
const PushNotificationIOS = require(‘react-native‘).PushNotificationIOS;
...
class PushService {
    //初始化推送
    init_pushService = () => {
        //添加监听事件
        PushNotificationIOS. addEventListener(‘register‘,this.register_push);
        //请求权限
        PushNotificationIOS.requestPermissions();
    }
    //获取权限成功的回调
    register_push = (deviceToken) => {
        //判断是否成功获取到devicetoken
        if (deviceToken) {
            this.saveDeviceToken(deviceToken);
        } 
    }
    //保存devicetoken到Installation表中
    saveDeviceToken = (deviceToken) => {
        global.Installation.getCurrent()
            .then(installation => {
            installation.set(‘deviceType‘, ‘ios‘);
            installation.set(‘apnsTopic‘, ‘工程bundleid‘);
            installation.set(‘deviceToken‘, deviceToken);
            return installation.save();
        });
    }
 
}

修改App.js文件 在componentDidMount初始化推送

import PushService from ‘./pushservice/PushService‘;
...
componentDidMount () {
    //初始化
    PushService.init_pushService();
}

运行项目,必须真机才能获取到deviceToken,模拟器获取不到,看看是否保存的deviceToken,如果保存成功,leandclound后台能发现_Installation表多了一条数据

react-native 使用leanclound消息推送进行到这步了就已经完成了一半了,现在只需要配置推送证书即可接收推送消息,这里就不介绍配置证书流程了,详细步骤请参考 iOS推送证书设置 ,推送证书设置完成后,现在就去leanclound试试看能不能收到推送吧,退出APP,让APP处于后台状态,react-native 使用leanclound消息推送 点击发送,看是不是收到了消息.

进行到这步骤说明推送已经完成了一大半了,APP当然还需要包括以下功能:

  • APP在前台、后台或者关闭状态下也能收到推送消息
  • 点击通知能够对消息进行操作,比如跳转到具体页面

APP处于前台状态时通知的显示

当APP在前台运行时的通知iOS是不会提醒的(iOS10后开始支持前台显示),因此需要实现的功能就是收到通知并在前端显示,这时候就要使用一个模块来支持该功能了,那就是react-native-message-bar

首先就是安装react-native-message-bar模块了

yarn add react-native-message-bar //yarn安装
或者
npm install react-native-message-bar --save //npm安装

安装成功之后,在App.js文件中引入并注册MessageBar

...
/*
*引入展示通知模块
 */
const MessageBarAlert = require(‘react-native-message-bar‘).MessageBar;
const MessageBarManager = require(‘react-native-message-bar‘).MessageBarManager;
...
componentDidMount () {
    //初始化
    PushService.init_pushService();
    MessageBarManager.registerMessageBar(this.alert);
}
...
render() {
    const {Nav} = this.state
    if (Nav) {
      return (
       //这里用到了导航,所以需要这样写,布局才不会乱 MessageBarAlert绑定一个alert
        <View style={{flex: 1,}}>
          <Nav />
          <MessageBarAlert ref={(c) => { this.alert = c }} />
        </View>
      )
    }
    return <View />
  }

然后再对PushService进行修改,新增对notification事件监听和推送消息的展示

import { AppState, NativeModules, Alert, DeviceEventEmitter } from ‘react-native‘;
    ...
    //初始化推送
    init_pushService = () => {
        //添加监听事件
        PushNotificationIOS. addEventListener(‘register‘,this.register_push);
        PushNotificationIOS.addEventListener(‘notification‘, this._onNotification);
        //请求权限
        PushNotificationIOS.requestPermissions();
    }
    _onNotification = ( notification ) => {
        var state = AppState.currentState;
        // 判断当前状态是否是在前台
        if (state === ‘active‘) {
            this._showAlert(notification._alert);
        }
    }
    ...
    _showAlert = ( message ) => {
        const MessageBarManager = require(‘react-native-message-bar‘).MessageBarManager;
        MessageBarManager.showAlert({
        title: ‘您有一条新的消息‘,
        message: message,
        alertType: ‘success‘,
        stylesheetSuccess: {
            backgroundColor: ‘#7851B3‘, 
            titleColor: ‘#fff‘, 
            messageColor: ‘#fff‘
        },
        viewTopInset : 20
    });

    }

    ...

最后重新运行APP并在leanclound发送一条消息,看是否在APP打开状态也能收到通知,到了这里推送就完成了

相关推荐