使用 Linux 下的 TC 流量控制测试

需要对网关做流量控制,针对IP和网段做控制,也有结合iptables实现方式,可能也有针对内外网的服务器,规则明白了,都很容易。

下面是shell脚本,非iptables方式:

#!/bin/bash

# Set the following values to somewhat less than your actual download

# and uplink speed. In kilobits. Also set the device that is to be shaped.

#INGOING traffic (gateway)

IN=eth0

#what ip do you want to limit

INET="192.168.138."

IPS="100"

IPE="254"

#Total DOWNLINK

DOWN="100mbit"

#ensure rate speed of DOWNLINK

DOWNLOADrate="100kbit"

#Allow max rate speed of DOWNLINK

DOWNLOADceil="250kbit"

start(){

    #clean eth1 eth0 existing down- and uplink qdiscs, hide errors

    /sbin/tc qdisc del dev $IN root 2>/dev/null

    # install root htb of downlink and uplink

    # main class

    /sbin/tc qdisc add dev $IN root handle 1: htb

    /sbin/tc class add dev $IN parent 1: classid 1:1 htb rate $DOWN ceil $DOWN

    #simgle ip limit

    /sbin/tc class add dev $IN parent 1:1 classid 1:2 htb rate $DOWNLOADrate ceil $DOWNLOADrate

    /sbin/tc qdisc add dev $IN parent 1:2 sfq perturb 2

    /sbin/tc filter add dev $IN protocol ip parent 1: prio 49 u32 match ip dst 192.168.138.10 flowid 1:2

    /sbin/tc filter add dev $IN protocol ip parent 1: prio 49 u32 match ip dst 192.168.2.0/32 flowid 1:2

    #net1 limit

    for (( i=$IPS; i<=$IPE; i=i+1 ))

    do

        #####Control DOWNLINK

        /sbin/tc class add dev $IN parent 1:1 classid 1:1$i htb rate $DOWNLOADrate ceil $DOWNLOADceil

        /sbin/tc qdisc add dev $IN parent 1:1$i sfq perturb 1$i

        /sbin/tc filter add dev $IN protocol ip parent 1: prio 50 u32 match ip dst $INET$i flowid 1:1$i

    done

    #net2 limit

    #for (( i=$IPS; i<=$IPE; i=i+1 ))

    #do

    # #####Control DOWNLINK

    # /sbin/tc class add dev $IN parent 1:1 classid 1:2$i htb rate $DOWNLOADrate ceil $DOWNLOADceil

    # /sbin/tc qdisc add dev $IN parent 1:2$i sfq perturb 2$i

    # /sbin/tc filter add dev $IN protocol ip parent 1: prio 50 u32 match ip dst $INET$i flowid 1:2$i

    #done

    #Other traffic

    /sbin/tc filter add dev $IN protocol ip parent 1: prio 2 u32 match ip dst 0.0.0.0/32 flowid 1:1

}

stop(){

    echo -n "(Delete all qdisc......)"

    (/sbin/tc qdisc del dev $IN root 2>/dev/null && echo "ok.Delete sucessfully!") || echo "error."

}

#show status

status() {

    echo "1.show qdisc $IN:----------------------------------------------"

    /sbin/tc -s qdisc show dev $IN

    echo "2.show class $IN:----------------------------------------------"

    N1=`/sbin/tc class show dev $IN | wc -l`

    if [ $N1 == 0 ];then

        echo "NULL, OFF Limiting "

    else

        /sbin/tc -s class show dev $IN

        echo "It work"

    fi

}

#show help

usage() {

    echo "(usage): `basename $0` [start | stop | restart | status ]"

    echo "help:"

    echo "start -- TC Flow Control start"

    echo "stop -- TC Flow Control stop"

    echo "restart -- TC Flow Control restart"

    echo "status -- TC Show all TC Qdisc and class"

}

case "$1" in

    start)

        ( start && echo "Flow Control! TC started!" ) || echo "error."

        exit 0

        ;;

 

    stop)

        ( stop && echo "Flow Control TC stopped!" ) || echo "error."

        exit 0

        ;;

    restart)

        stop

        start

        echo "Flow Control restart"

        ;;

    status)

        status

        ;;

 

    *) usage

        exit 1

        ;;

esac

相关推荐