Docker多主机网络 OpenvSwitch

Open vSwitch                                      

 Open vSwitch(以下简称为OVS),英文全称:OpenVirtual Switch,顾名思义,Open vSwitch就是开放虚拟交换。我们可以把他理解成一种标准,它旨在通过编程扩展,使庞大的网络自动化(配置、管理、维护),同时还支持标准的管理接口和协议。

  也可以把OVS理解成开源虚拟交换机,可以运行在各类虚拟化平台(如KVM,Xen)上的虚拟机交换机。在虚拟化平台上,OVS 可以为动态变化的端点提供 2 层交换功能,很好的控制虚拟网络中的访问策略、网络隔离、流量监控等等。

利用Open vSwitch 构建Docker多主机网络                          

规划docker网段

默认的docker0的网段是 172.17.0.0/16,我们需要为每一个docker主机的docker0网段重新划分一个新网段

节点IPdocker0网段
openvswitch01192.168.1.220172.17.1.0/24
openvswitch02192.168.1.221172.17.2.0/24

安装OVS,docker见安装篇

两台机器上都要安装

 修改docker0默认网段 

节点1
[ ~]# vi /lib/systemd/system/docker.service
ExecStart=/usr/bin/dockerd --bip=172.17.1.1/24
[ ~]#  systemctl daemon-reload
[ ~]# systemctl restart docker
节点2
[ ~]# vi /lib/systemd/system/docker.service
ExecStart=/usr/bin/dockerd --bip=172.172.2.1/24
[ ~]#  systemctl daemon-reload
[ ~]# systemctl restart docker

创建网桥并激活

两边都操作

节点1
[ ~]# ovs-vsctl add-br br0
[ ~]# ip link set dev br0 up
节点2
[ ~]# ovs-vsctl add-br br0
[ ~]# ip link set dev br0 up

 建立gre隧道

节点1
[ ~]# ovs-vsctl add-port br0 gre0 -- set Interface gre0 type=gre options:remote_ip=192.168.1.221
# 如果有多个节点,需要添加多条greX(gre0,gre1,...)
## 将docker0加入br0
[ ~]# yum install bridge-utils
[ ~]# brctl addif docker0 br0
节点2
[ ~]# ovs-vsctl add-port br0 gre0 -- set Interface gre0 type=gre options:remote_ip=192.168.1.220
# 如果有多个节点,需要添加多条greX(gre0,gre1,...)
## 将docker0加入br0
[ ~]# yum install bridge-utils
[ ~]# brctl addif docker0 br0
[ yum.repos.d]# ovs-vsctl show
523304ce-9283-4cbf-bb4c-83c92506a3ea
    Bridge "br0"
        Port "br0"
            Interface "br0"
                type: internal
        Port "gre0"
            Interface "gre0"
                type: gre
                options: {remote_ip="192.168.1.220"}
    ovs_version: "2.5.2"

查看docker0网段

3: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 02:42:80:63:3f:36 brd ff:ff:ff:ff:ff:ff
    inet 172.17.1.1/24 brd 172.17.1.255 scope global docker0
       valid_lft forever preferred_lft forever
    inet6 fe80::42:80ff:fe63:3f36/64 scope link 
       valid_lft forever preferred_lft forever

3: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 02:42:03:c4:ce:3c brd ff:ff:ff:ff:ff:ff
    inet 172.17.2.1/24 brd 172.17.2.255 scope global docker0
       valid_lft forever preferred_lft forever
    inet6 fe80::42:3ff:fec4:ce3c/64 scope link 
       valid_lft forever preferred_lft forever

添加静态路由

[ SOURCES]# docker run -it busybox
Unable to find image ‘busybox:latest‘ locally
latest: Pulling from library/busybox
322973677ef5: Pull complete 
Digest: sha256:1828edd60c5efd34b2bf5dd3282ec0cc04d47b2ff9caa0b6d4f07a21d1c08084
Status: Downloaded newer image for busybox:latest

/ # ifconfigeth0      Link encap:Ethernet  HWaddr 02:42:AC:11:01:02            inet addr:172.17.1.2  Bcast:172.17.1.255  Mask:255.255.255.0          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          RX packets:8 errors:0 dropped:0 overruns:0 frame:0          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:0           RX bytes:648 (648.0 B)  TX bytes:0 (0.0 B)

lo Link encap:Local Loopback           inet addr:127.0.0.1  Mask:255.0.0.0          UP LOOPBACK RUNNING  MTU:65536  Metric:1          RX packets:0 errors:0 dropped:0 overruns:0 frame:0          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:1           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
[ yum.repos.d]# docker run -it busybox
Unable to find image ‘busybox:latest‘ locally
latest: Pulling from library/busybox
322973677ef5: Pull complete 
Digest: sha256:1828edd60c5efd34b2bf5dd3282ec0cc04d47b2ff9caa0b6d4f07a21d1c08084
Status: Downloaded newer image for busybox:latest

/ # ifconfigeth0      Link encap:Ethernet  HWaddr 02:42:AC:11:02:02            inet addr:172.17.2.2  Bcast:172.17.2.255  Mask:255.255.255.0          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          RX packets:8 errors:0 dropped:0 overruns:0 frame:0          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:0           RX bytes:648 (648.0 B)  TX bytes:0 (0.0 B)
lo        Link encap:Local Loopback            inet addr:127.0.0.1  Mask:255.0.0.0          UP LOOPBACK RUNNING  MTU:65536  Metric:1          RX packets:0 errors:0 dropped:0 overruns:0 frame:0          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:1           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
/ # 

# 两个节点

[ SOURCES]# ip route add 172.17.0.0/16 dev docker0

测试

/ # ping 172.17.2.2
PING 172.17.2.2 (172.17.2.2): 56 data bytes
64 bytes from 172.17.2.2: seq=0 ttl=63 time=2.379 ms
64 bytes from 172.17.2.2: seq=1 ttl=63 time=7.660 ms
64 bytes from 172.17.2.2: seq=2 ttl=63 time=0.465 ms
64 bytes from 172.17.2.2: seq=3 ttl=63 time=0.757 ms
64 bytes from 172.17.2.2: seq=4 ttl=63 time=0.615 ms
64 bytes from 172.17.2.2: seq=5 ttl=63 time=0.928 ms
64 bytes from 172.17.2.2: seq=6 ttl=63 time=0.610 ms
64 bytes from 172.17.2.2: seq=7 ttl=63 time=0.688 ms
64 bytes from 172.17.2.2: seq=8 ttl=63 time=1.127 ms
64 bytes from 172.17.2.2: seq=9 ttl=63 time=1.152 ms
^C
--- 172.17.2.2 ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
round-trip min/avg/max = 0.465/1.638/7.660 ms

/ # ping 172.17.1.2
PING 172.17.1.2 (172.17.1.2): 56 data bytes
64 bytes from 172.17.1.2: seq=0 ttl=63 time=4.920 ms
64 bytes from 172.17.1.2: seq=1 ttl=63 time=0.494 ms
64 bytes from 172.17.1.2: seq=2 ttl=63 time=1.217 ms
64 bytes from 172.17.1.2: seq=3 ttl=63 time=1.236 ms
64 bytes from 172.17.1.2: seq=4 ttl=63 time=0.536 ms
^C
--- 172.17.1.2 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.494/1.680/4.920 ms

注:以上配置重启就部分会消失,可以设置脚本启动加载

# 启动br0网桥

ip link set dev br0 up
 
# 将docker0添加到br0中
brctl addif docker0 br0
 
# 添加静态路由
ip route add 172.17.0.0/16 dev docker0
 
 
# 添加到/etc/rc.local

相关推荐